old (unreleased) Galor/Keldon is now dead

The place for all things related to the "sacred scale".
steelfox
Legendary LT Commander
Legendary LT Commander
Posts: 130
Joined: Sat Nov 03, 2012 8:40 am

Re: old (unreleased) Galor/Keldon

Post by steelfox » Sat Jun 09, 2018 1:55 am

If I recall correctly I used the 'cruiser' length of 475m when I made the master.
At that point, Mr Sternbach's 370m concept wasn't common knowledge and the on-screen portrayal of the Galor indicated a larger vessel.
At approximately 3/4 the length of a Galaxy Class it was roughly equivalent in capability to the older Federation Ambassador Class.

Regarding 'interior' details:
I opened up the large hangar/cargo bay(?) on the underside of the main hull and added some interior detail for variety.
Since it was never shown on screen, I just "made sh*t up." It is easy enough to glue the 'door' closed if you don't like or want the interior.

The Keldon is simply the Galor production model with the box on top and some extra engines at the back.
The doors & Hangar bays on the 'turtleback are another 'thing' I made up to give some options for the modeller.
I treated the 'turtleback' as a multi-purpose module, similar to the variety of pods used on the Feddie Nebula class.
IIRC I Made a couple of teensy-tiny fighters, shuttles & assault boats to go with it. Similar to the shuttle I made for the Defiant class model.
If you want them to be grills or emitters or some other 'greeblie' then just glue them on and paint to taste.

So if you want the 370m 'destroyer' size Galor, get the Round 2 kit.
If you want the 475m 'cruiser' size interpretation, get Chris' kit when it comes out.

Da Fox
:D

OdysseySlipways
Crafty Commodore
Crafty Commodore
Posts: 1101
Joined: Sun Sep 30, 2012 2:11 am
Location: Altoona, Pa.

Re: old (unreleased) Galor/Keldon

Post by OdysseySlipways » Sat Jun 09, 2018 2:20 am

glad to see your still out and about!

OdysseySlipways
Crafty Commodore
Crafty Commodore
Posts: 1101
Joined: Sun Sep 30, 2012 2:11 am
Location: Altoona, Pa.

Re: old (unreleased) Galor/Keldon

Post by OdysseySlipways » Tue Jun 19, 2018 1:38 pm

the Galor/Keldon kit is dead, this time possibly for good. i am contacting Scott to return it an 2 other masters there.

paulpratt
Lighting Fast Lieutenant JG
Lighting Fast Lieutenant JG
Posts: 39
Joined: Sat Sep 26, 2015 3:25 am
Location: Montgomery, AL

Re: old (unreleased) Galor/Keldon is now dead

Post by paulpratt » Tue Jun 19, 2018 6:31 pm

Balls. The larger Galor is exactly what i've been looking for. The Round 2 one is just too tiny for my taste.
Best,
-Paul

User avatar
Xen
Bear with me
Bear with me
Posts: 1438
Joined: Sat Sep 08, 2012 1:19 am

Re: old (unreleased) Galor/Keldon is now dead

Post by Xen » Tue Jun 19, 2018 7:25 pm

i have always [since back when tng was airing] thought the galor was 2/3 the length of the d. the canon size just doesn't sound right.

i've said it before in another thread, but it is not possible for you to release that as is?

OdysseySlipways
Crafty Commodore
Crafty Commodore
Posts: 1101
Joined: Sun Sep 30, 2012 2:11 am
Location: Altoona, Pa.

Re: old (unreleased) Galor/Keldon is now dead

Post by OdysseySlipways » Tue Jun 19, 2018 8:05 pm

i was asked if i would consider molding it up "as is" along with the parts i have cast for it. as the tub of rubber in the basement is just sitting there starting to go bad, if i get it back soon enough then yes, i'll dip it in rubber

User avatar
mophius
Crafty Captain
Crafty Captain
Posts: 1075
Joined: Thu Jan 05, 2017 7:04 am

Re: old (unreleased) Galor/Keldon is now dead

Post by mophius » Thu Jun 21, 2018 9:39 am

Mark me down for at least 1 if you do
OdysseySlipways wrote:
Tue Jun 19, 2018 8:05 pm
i was asked if i would consider molding it up "as is" along with the parts i have cast for it. as the tub of rubber in the basement is just sitting there starting to go bad, if i get it back soon enough then yes, i'll dip it in rubber
There is no dark side of the moon really, matter of fact its all dark.

Imgur
Shapeways Shop

Post Reply

Return to “1/2500”