Hi guys, I'm a new member here and this is my first post. I've been lurking about for the past few weeks and admiring all the fantastic models everyone is making. I've been bitten by the 2500 scale bug and I'm searching for decals for the Enterprise NX-01 Refit. I got a 2500 scale from Shapeways and want to make it look nice. Does anyone have a scan of these or point me to a vendor that sells them?
Thanks in advanced!
Just to clear up my post a bit. It's not the Aztecs I'm looking for but rather it's the stripes.
Thanks again.
1/2500 Scale Cadet Series Decal Scans
- ewg1967
- Lighting Fast Lieutenant JG
- Posts: 48
- Joined: Wed Dec 13, 2017 6:42 pm
- Location: Greenville, NC
Re: 1/2500 Scale Cadet Series Decal Scans
- Attachments
-
- 22193.jpg (10.48 KiB) Viewed 4193 times
My albums on Flickr https://www.flickr.com/photos/ewg1967/a ... 8883157052
-
- Candid Cadet
- Posts: 6
- Joined: Sun Aug 20, 2017 7:01 am
Re: 1/2500 Scale Cadet Series Decal Scans
Does there exist a set of the aztec decals for the 1701-A with the proper colorings and all? I had hoped Cadet Movie set had had the option or the all enterprise set but none do. help?
- mophius
- Crafty Captain
- Posts: 1486
- Joined: Thu Jan 05, 2017 7:04 am
Re: 1/2500 Scale Cadet Series Decal Scans
Well there are the two Cadet kits that have the Azteking but also there are a few aftermarket sets that could be used.stephan2006 wrote:Does there exist a set of the aztec decals for the 1701-A with the proper colorings and all? I had hoped Cadet Movie set had had the option or the all enterprise set but none do. help?
Federation Models has a few of them,
First is from Absolute Models, no refit option here though it will be the 1701-A.
Secondly there is JDecals Cadet series set. I have not looked closely at my set of these but apparently they are a different shade to the cadet series.
Third is the Gizmotron set these are blank so you will need some alphanumerics.
Then JT Graphics and PNT Decals have some nice detailing sets but they don't have any Azteking.
Alternatively you could contact Meatloafr on here to see what he has available in his line.
Hope this helps some.
There is no dark side of the moon really, matter of fact its all dark.
- ewg1967
- Lighting Fast Lieutenant JG
- Posts: 48
- Joined: Wed Dec 13, 2017 6:42 pm
- Location: Greenville, NC
Re: 1/2500 Scale Cadet Series Decal Scans
Yes, try contacting Meatloafr. He created a beautiful set for me.mophius wrote:Alternatively you could contact Meatloafr on here to see what he has available in his line.
My albums on Flickr https://www.flickr.com/photos/ewg1967/a ... 8883157052
- mophius
- Crafty Captain
- Posts: 1486
- Joined: Thu Jan 05, 2017 7:04 am
Re: 1/2500 Scale Cadet Series Decal Scans
Gizmo Centaur. Not as crisp as I thought it was.
There is no dark side of the moon really, matter of fact its all dark.
- No Good modeler
- Legendary LT Commander
- Posts: 159
- Joined: Wed Sep 14, 2016 6:26 pm
- Location: Porbably at work not doing any work.
Re: 1/2500 Scale Cadet Series Decal Scans
mophius wrote:Gizmo Centaur. Not as crisp as I thought it was.
Centaur-TOS-Patrol-Escort.jpg
Great, thank you.
- MEATLOAFr
- Velutinous Vice Admiral
- Posts: 2624
- Joined: Fri Sep 28, 2012 12:46 pm
- Location: Omaha, NE
Re: 1/2500 Scale Cadet Series Decal Scans
any chance for a higher rez scan or a top down picture with ruler?mophius wrote:Gizmo Centaur. Not as crisp as I thought it was.
Centaur-TOS-Patrol-Escort.jpg
If the world ends tomorrow, it's ALL YOUR FAULT!!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
- el gato
- Fatidical Fleet Admiral
- Posts: 6050
- Joined: Thu Apr 04, 2013 8:41 pm
- Location: In a land whose boundaries are that of imagination
Re: 1/2500 Scale Cadet Series Decal Scans
At the very least, the saucer decal is not sized correctly. It suffers from the same issue as the Excelsior saucer decals: it's too small. I'm also very, very suspicious about the pylon decalsmophius wrote:Gizmo Centaur. Not as crisp as I thought it was.
RogueWolf wrote:I've sacrificed many dozens (maybe even hundreds) of gummy bears to the dark modeling gods to grant me my wish... but I fear my offerings only amuse them, not appease them.
- mophius
- Crafty Captain
- Posts: 1486
- Joined: Thu Jan 05, 2017 7:04 am
Re: 1/2500 Scale Cadet Series Decal Scans
I will try to do that Sunday. This was set at 600dpi which is the highest I can do
There is no dark side of the moon really, matter of fact its all dark.
-
- Can-Do Captain
- Posts: 877
- Joined: Tue Apr 22, 2014 11:08 pm
- Location: Adelaide, South Australia
Re: 1/2500 Scale Cadet Series Decal Scans
It's been asked for before, but I find myself needing instructions for the Enterprise B decal placement. Can anyone help?
Andy
Andy