Starcrafts 1:1400 TOS Enterprise (FINISHED)
- ProfArturo
- Can-Do Captain
- Posts: 624
- Joined: Sun Mar 25, 2018 1:06 pm
Starcrafts 1:1400 TOS Enterprise (FINISHED)
My latest project, which arrived last week. I was delighted to discover the existence of these Starcraft kits, and hopefully one day I'll have the entire Enterprise range. I've also ordered another more detailed decal sheet from JT Graphics, though the model itself is very intricate for it's size.
I've currently got as far as sanding it down and removing the mold marks, and drilling the holes for the dowel.
I think it looks about right although I had some trouble with the alignment of the hole on the model so I'm going to have to partially fill it and try again. It's my first time mounting a model like this though so I'm not too suprised.
My next task is to decide what colour to paint the hull, I'm torn between using the same shade of grey I used on my E-E (127), or this other slightly lighter grey (147):
I'm also not sure how I'm going to paint the windows neatly yet as I usually use a fine point sharpie to draw them in, but they're much too small on this kit to be able to do that.
Thanks for looking!
I've currently got as far as sanding it down and removing the mold marks, and drilling the holes for the dowel.
I think it looks about right although I had some trouble with the alignment of the hole on the model so I'm going to have to partially fill it and try again. It's my first time mounting a model like this though so I'm not too suprised.
My next task is to decide what colour to paint the hull, I'm torn between using the same shade of grey I used on my E-E (127), or this other slightly lighter grey (147):
I'm also not sure how I'm going to paint the windows neatly yet as I usually use a fine point sharpie to draw them in, but they're much too small on this kit to be able to do that.
Thanks for looking!
Last edited by ProfArturo on Fri Nov 16, 2018 5:35 pm, edited 1 time in total.
- Tesral
- Administrator
- Posts: 4937
- Joined: Tue Dec 18, 2012 12:58 pm
- Location: Dearborn, Mi -- at my desk.
- Contact:
Re: Starcrafts 1:1400 TOS Enterprise (WiP)
I would do it with decals. 1/1400 is smaller than the 1/1000 and trying to draw windows on that would be a fist class pain.
Garry AKA --Phoenix-- Rising above the Flames.
"I saw it done on Voyager" is no excuse for anything, even breathing.
"I saw it done on Voyager" is no excuse for anything, even breathing.
- ProfArturo
- Can-Do Captain
- Posts: 624
- Joined: Sun Mar 25, 2018 1:06 pm
Re: Starcrafts 1:1400 TOS Enterprise (WiP)
Yeah, I see JT Graphics do a window one, I should have ordered one at the same time as my other sheet really.
At least there's very few windows on this compared to the other ships.
At least there's very few windows on this compared to the other ships.
- trekriffic
- Admiral of the Fleet
- Posts: 2746
- Joined: Mon Oct 01, 2012 4:16 pm
Re: Starcrafts 1:1400 TOS Enterprise (WiP)
This is coming along quite well. As far as as the colors go. I like the lighter grey for the main hull color and the darker grey for accent colors like the leading edge of the connecting dorsal, the scalloped areas under and behind the bussard dome"vents", the screens in the trenches on the nacelles, and the rear nacelle caps.
"You broke your little ships."
My albums on flickr: https://www.flickr.com/photos/29607470@N08/sets/
My albums on flickr: https://www.flickr.com/photos/29607470@N08/sets/
- ProfArturo
- Can-Do Captain
- Posts: 624
- Joined: Sun Mar 25, 2018 1:06 pm
Re: Starcrafts 1:1400 TOS Enterprise (WiP)
Not much more progress on this lately as I've been away working. I've kept on filling and sanding the seams and other imperfections as it's difficult to say 'enough is enough' and just start painting.
I think the same light and dark grey colour scheme I used on my Ent-E will be the one.
I've also taken delivery of this little haul from Federation Models this week:
All I'm missing now is the Enterprise C and NX-01 (can you even get a 1400 one?) and I'll have the full set!
I think the same light and dark grey colour scheme I used on my Ent-E will be the one.
I've also taken delivery of this little haul from Federation Models this week:
All I'm missing now is the Enterprise C and NX-01 (can you even get a 1400 one?) and I'll have the full set!
- mophius
- Crafty Captain
- Posts: 1486
- Joined: Thu Jan 05, 2017 7:04 am
Re: Starcrafts 1:1400 TOS Enterprise (WiP)
You can get a 1/1400 Akiraprise which is an NX-01
look at Federation Models under Miscellaneous Models
Akiraprise
This is a 1:1400 scale one piece model of the Enterprise NX-01, it measures 5.5" long.
Item #MISC-06
$30
look at Federation Models under Miscellaneous Models
Akiraprise
This is a 1:1400 scale one piece model of the Enterprise NX-01, it measures 5.5" long.
Item #MISC-06
$30
There is no dark side of the moon really, matter of fact its all dark.
- ProfArturo
- Can-Do Captain
- Posts: 624
- Joined: Sun Mar 25, 2018 1:06 pm
Re: Starcrafts 1:1400 TOS Enterprise (WiP)
Ah thanks, doesn't look ike it comes with any decals though.
Think I might try get all these Federation Enterprises built before I branch out any more, the Mrs is already going mad at me!
Think I might try get all these Federation Enterprises built before I branch out any more, the Mrs is already going mad at me!
- ProfArturo
- Can-Do Captain
- Posts: 624
- Joined: Sun Mar 25, 2018 1:06 pm
Re: Starcrafts 1:1400 TOS Enterprise (WiP)
Been away working a lot lately so haven't made much progress on the Enterprise, but hopefully by the end of June I'll be getting the paint on.
-
- Lemme At Em Lieutenant
- Posts: 61
- Joined: Mon Mar 26, 2018 1:17 am
- Location: Greater Manchester, UK
Re: Starcrafts 1:1400 TOS Enterprise (WiP)
Resin Modeller does the NX as well, along with a few other ENT-era ships in 1400.
1:1400 newbie.
- novahobbies
- Crafty Commodore
- Posts: 1389
- Joined: Sun Mar 16, 2014 6:10 pm
Re: Starcrafts 1:1400 TOS Enterprise (WiP)
Looks like you're getting quite the collection there! You're gonna have a blast!