1/2500 Scale Cadet Series Decal Scans

ewg1967 · Post by **ewg1967** » Sun Dec 24, 2017 12:32 am

Hi guys, I'm a new member here and this is my first post. I've been lurking about for the past few weeks and admiring all the fantastic models everyone is making. I've been bitten by the 2500 scale bug and I'm searching for decals for the Enterprise NX-01 Refit. I got a 2500 scale from Shapeways and want to make it look nice. Does anyone have a scan of these or point me to a vendor that sells them?
Thanks in advanced!

Just to clear up my post a bit. It's not the Aztecs I'm looking for but rather it's the stripes.
Thanks again.

stephan2006 · Post by **stephan2006** » Sun Mar 25, 2018 4:20 am

Does there exist a set of the aztec decals for the 1701-A with the proper colorings and all? I had hoped Cadet Movie set had had the option or the all enterprise set but none do. help?

mophius · Post by **mophius** » Sun Mar 25, 2018 8:15 am

stephan2006 wrote:Does there exist a set of the aztec decals for the 1701-A with the proper colorings and all? I had hoped Cadet Movie set had had the option or the all enterprise set but none do. help?

Well there are the two Cadet kits that have the Azteking but also there are a few aftermarket sets that could be used.
Federation Models has a few of them,
First is from Absolute Models, no refit option here though it will be the 1701-A.
Secondly there is JDecals Cadet series set. I have not looked closely at my set of these but apparently they are a different shade to the cadet series.
Third is the Gizmotron set these are blank so you will need some alphanumerics.
Then JT Graphics and PNT Decals have some nice detailing sets but they don't have any Azteking.

Alternatively you could contact Meatloafr on here to see what he has available in his line.

Hope this helps some.

ewg1967 · Post by **ewg1967** » Sun Mar 25, 2018 8:29 pm

mophius wrote:Alternatively you could contact Meatloafr on here to see what he has available in his line.

Yes, try contacting Meatloafr. He created a beautiful set for me.

mophius · Post by **mophius** » Fri May 18, 2018 6:09 pm

Gizmo Centaur. Not as crisp as I thought it was.

No Good modeler · Post by **No Good modeler** » Sat May 19, 2018 2:29 am

mophius wrote:Gizmo Centaur. Not as crisp as I thought it was.
Centaur-TOS-Patrol-Escort.jpg

Great, thank you.

MEATLOAFr · Post by **MEATLOAFr** » Sat May 19, 2018 2:47 am

mophius wrote:Gizmo Centaur. Not as crisp as I thought it was.
Centaur-TOS-Patrol-Escort.jpg

any chance for a higher rez scan or a top down picture with ruler?

el gato · Post by **el gato** » Sat May 19, 2018 5:17 am

mophius wrote:Gizmo Centaur. Not as crisp as I thought it was.

At the very least, the saucer decal is not sized correctly. It suffers from the same issue as the Excelsior saucer decals: it's too small. I'm also very, very suspicious about the pylon decals

mophius · Post by **mophius** » Sat May 19, 2018 6:41 am

I will try to do that Sunday. This was set at 600dpi which is the highest I can do

andyh · Post by **andyh** » Sat Aug 11, 2018 1:06 pm

It's been asked for before, but I find myself needing instructions for the Enterprise B decal placement. Can anyone help?

Andy

All Scale Trek

All Scale Trek

1/2500 Scale Cadet Series Decal Scans

Re: 1/2500 Scale Cadet Series Decal Scans

Re: 1/2500 Scale Cadet Series Decal Scans

Re: 1/2500 Scale Cadet Series Decal Scans

Re: 1/2500 Scale Cadet Series Decal Scans

Re: 1/2500 Scale Cadet Series Decal Scans

Re: 1/2500 Scale Cadet Series Decal Scans

Re: 1/2500 Scale Cadet Series Decal Scans

Re: 1/2500 Scale Cadet Series Decal Scans

Re: 1/2500 Scale Cadet Series Decal Scans

Re: 1/2500 Scale Cadet Series Decal Scans