AST 1/1000 Defiant Kit preview (part 2) - Out Of Box Build!
- MEATLOAFr
- Velutinous Vice Admiral
- Posts: 2624
- Joined: Fri Sep 28, 2012 12:46 pm
- Location: Omaha, NE
Re: AST 1/1000 Defiant Kit preview (part 2) - Out Of Box Build!
Not much to show on it today, I gave it a shot of mr surface tonight
If the world ends tomorrow, it's ALL YOUR FAULT!!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
- MEATLOAFr
- Velutinous Vice Admiral
- Posts: 2624
- Joined: Fri Sep 28, 2012 12:46 pm
- Location: Omaha, NE
Re: AST 1/1000 Defiant Kit preview (part 2) - Out Of Box Build!
I got a little time today to work on this today, but not much as to what else needs to be done:
Base coats on the clear buzzard collectors and warp exhaust vents
Also a coat on tot he neck pipes:
I’m going to have to look at the filming model photo’s to see how these go, not much direction on how they fit -
Sanded the hull half’s to smooth that seam line:
Also fixed the glue seepage from the cowling:
Going to give the model another scrub to clean and give it another coat of paint tomorrow
Hopefully Sunday/Monday I’ll start placing decals on her.
Base coats on the clear buzzard collectors and warp exhaust vents
Also a coat on tot he neck pipes:
I’m going to have to look at the filming model photo’s to see how these go, not much direction on how they fit -
Sanded the hull half’s to smooth that seam line:
Also fixed the glue seepage from the cowling:
Going to give the model another scrub to clean and give it another coat of paint tomorrow
Hopefully Sunday/Monday I’ll start placing decals on her.
If the world ends tomorrow, it's ALL YOUR FAULT!!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
- Griffworks
- Can-Do Captain
- Posts: 959
- Joined: Fri Jun 07, 2013 12:57 am
- Location: Boundaries of Imagination
Re: AST 1/1000 Defiant Kit preview (part 2) - Out Of Box Build!
Nice work!
Eventually we mere mortals will be allowed to buy one. Until that day, we can pop in here and drool over your build.
Eventually we mere mortals will be allowed to buy one. Until that day, we can pop in here and drool over your build.
“And I looked, and behold a pale horse; and his name that sat on him was Death, and Hell followed with him.“
My Flickr Albums
My Flickr Albums
- MEATLOAFr
- Velutinous Vice Admiral
- Posts: 2624
- Joined: Fri Sep 28, 2012 12:46 pm
- Location: Omaha, NE
Re: AST 1/1000 Defiant Kit preview (part 2) - Out Of Box Build!
and drool you all shall...Griffworks wrote:Nice work!
Eventually we mere mortals will be allowed to buy one. Until that day, we can pop in here and drool over your build.
I like the size of the model - unfortunately the filming model had the magical size shifting abilities curse, but thankfully they didn't go with the smallest size that they used for the battle with the Lakota
If the world ends tomorrow, it's ALL YOUR FAULT!!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
- Tesral
- Administrator
- Posts: 4937
- Joined: Tue Dec 18, 2012 12:58 pm
- Location: Dearborn, Mi -- at my desk.
- Contact:
Re: AST 1/1000 Defiant Kit preview (part 2) - Out Of Box Build!
I'm watching with interest here. While not a kit I'm likely to buy it is a nice kit and build.
Garry AKA --Phoenix-- Rising above the Flames.
"I saw it done on Voyager" is no excuse for anything, even breathing.
"I saw it done on Voyager" is no excuse for anything, even breathing.
- MEATLOAFr
- Velutinous Vice Admiral
- Posts: 2624
- Joined: Fri Sep 28, 2012 12:46 pm
- Location: Omaha, NE
Re: AST 1/1000 Defiant Kit preview (part 2) - Out Of Box Build!
Here’s a shot of it painted – just have a few details to paint, but getting the decals on tonight
Have the upper decals cut and laid out in general positions – ready to start applying
AND NOW: DECALS
I have decal set working its magic on the decals – some might need a second application
Decals on the sides of the bridge have compound curves – along with the nose tip decal (I might need to trim it after drying)
The sand colored decals are opaque while the rest of the hull panel decals are transparent
While going thru the decal placement I found what my 2 missing parts were: I didn’t get the 2 swivel ball joint parts in my kit – the ones that allow you to display at any angle
Have the upper decals cut and laid out in general positions – ready to start applying
AND NOW: DECALS
I have decal set working its magic on the decals – some might need a second application
Decals on the sides of the bridge have compound curves – along with the nose tip decal (I might need to trim it after drying)
The sand colored decals are opaque while the rest of the hull panel decals are transparent
While going thru the decal placement I found what my 2 missing parts were: I didn’t get the 2 swivel ball joint parts in my kit – the ones that allow you to display at any angle
If the world ends tomorrow, it's ALL YOUR FAULT!!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
- Griffworks
- Can-Do Captain
- Posts: 959
- Joined: Fri Jun 07, 2013 12:57 am
- Location: Boundaries of Imagination
Re: AST 1/1000 Defiant Kit preview (part 2) - Out Of Box Build!
Nice! I'm actually excited about this kit now. When It was first announced I was sort "it's kewel, I guess, and I'll buy one, but ONLY one". Now I DEFINITELY want to buy one.
Hopefully, these'll be available in the next two or so weeks. Thanks for the ongoing pics!
Hopefully, these'll be available in the next two or so weeks. Thanks for the ongoing pics!
“And I looked, and behold a pale horse; and his name that sat on him was Death, and Hell followed with him.“
My Flickr Albums
My Flickr Albums
- MEATLOAFr
- Velutinous Vice Admiral
- Posts: 2624
- Joined: Fri Sep 28, 2012 12:46 pm
- Location: Omaha, NE
Re: AST 1/1000 Defiant Kit preview (part 2) - Out Of Box Build!
I'm looking forward to getting a few more for myself
One thing I'm looking forward to is seeing someone light one of these
One thing I'm looking forward to is seeing someone light one of these
If the world ends tomorrow, it's ALL YOUR FAULT!!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
- Tesral
- Administrator
- Posts: 4937
- Joined: Tue Dec 18, 2012 12:58 pm
- Location: Dearborn, Mi -- at my desk.
- Contact:
Re: AST 1/1000 Defiant Kit preview (part 2) - Out Of Box Build!
The decals really do the detail painting for you.
Garry AKA --Phoenix-- Rising above the Flames.
"I saw it done on Voyager" is no excuse for anything, even breathing.
"I saw it done on Voyager" is no excuse for anything, even breathing.
- MEATLOAFr
- Velutinous Vice Admiral
- Posts: 2624
- Joined: Fri Sep 28, 2012 12:46 pm
- Location: Omaha, NE
Re: AST 1/1000 Defiant Kit preview (part 2) - Out Of Box Build!
That they do - but some details might be best left to paint, as you'll see soon...Tesral wrote:The decals really do the detail painting for you.
Got to work on the bottom decals tonight:
All that I plan on using cut and ready to go:
A couple of the decals from the top wrap around to the bottom of the ship
I have chosen to use the white windows included with the kit - they were nive to have black or white windoes to choose from
some of the detail decals will require some decal solvent – unfortunately my bottle was found empty in my paint box (I’ll have to pick some up this weekend)
One thing I can say for sure for everyone: make sure to have decal solvent if you plan on using them
If the world ends tomorrow, it's ALL YOUR FAULT!!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!