Varisous bits...

Scratchbuilding, kitbashing, reposing and other modifications.
dJiPi
Charismatic Commander
Charismatic Commander
Posts: 364
Joined: Sun Jan 31, 2016 10:35 am
Location: Paris, FRANCE

Re: Varisous bits...

Post by dJiPi » Fri Feb 05, 2016 5:29 pm

Thanks for the 2 links but I'm afraid that the actual kit contains only 2 "discs" i.o. the full sprue you've shown to us, especially when I look at the second picture
dJiPi the froggy

dJiPi
Charismatic Commander
Charismatic Commander
Posts: 364
Joined: Sun Jan 31, 2016 10:35 am
Location: Paris, FRANCE

Re: Varisous bits...

Post by dJiPi » Fri Feb 05, 2016 8:13 pm

Here are 2 pics of my ideas about bases as saucers
image.jpeg
image.jpeg (93.97 KiB) Viewed 1764 times
image.jpeg
image.jpeg (53.62 KiB) Viewed 1764 times
dJiPi the froggy

dJiPi
Charismatic Commander
Charismatic Commander
Posts: 364
Joined: Sun Jan 31, 2016 10:35 am
Location: Paris, FRANCE

Re: Varisous bits...

Post by dJiPi » Mon Feb 08, 2016 8:41 am

Hi there,
talking about saucers/bridge, how thick should be one deck in the sacred scale, approx 2mm ?
dJiPi the froggy

User avatar
Tesral
Bear with me
Bear with me
Posts: 3300
Joined: Tue Dec 18, 2012 12:58 pm
Location: Dearborn, Mi -- at my desk.
Contact:

Re: Varisous bits...

Post by Tesral » Mon Feb 08, 2016 2:30 pm

dJiPi wrote:Hi there,
talking about saucers/bridge, how thick should be one deck in the sacred scale, approx 2mm ?
0.060 inches is a good measure.
Garry AKA --Phoenix-- Rising above the Flames.
"I saw it done on Voyager" is no excuse for anything, even breathing.

dJiPi
Charismatic Commander
Charismatic Commander
Posts: 364
Joined: Sun Jan 31, 2016 10:35 am
Location: Paris, FRANCE

Re: Varisous bits...

Post by dJiPi » Mon Feb 08, 2016 3:29 pm

Thanks
dJiPi the froggy

dJiPi
Charismatic Commander
Charismatic Commander
Posts: 364
Joined: Sun Jan 31, 2016 10:35 am
Location: Paris, FRANCE

Re: Varisous bits...

Post by dJiPi » Wed Dec 21, 2016 11:15 am

Don't know if this idea has already been shared but here it is:
staple: alone, can be used as a "door" frame for a shuttle bay, in group, can be used as a technical bit such as cooling device. :D
dJiPi the froggy

Post Reply

Return to “Customizing”