Decals
- Hossfly72
- Charismatic Commander
- Posts: 498
- Joined: Sat Nov 09, 2013 8:15 pm
- Location: Lower Alabama
Re: Decals
I'm guessing you're asking about the wallpaper decals in that Cadet Enterprise kit(s) you got? The idea is that by using those decals, you don't have to paint the ship if you don't want to and it'll still look good. Not a bad idea and it works pretty well if you're very patient, have a lot of setting solution and maybe a hair dryer for a little heat. They're supposed to make the ship look like it did in the movies, with the differently colored hul plates. It breaks up the monotony of an all white ship.
i don't know. I'm making it up as I go.
- Hossfly72
- Charismatic Commander
- Posts: 498
- Joined: Sat Nov 09, 2013 8:15 pm
- Location: Lower Alabama
- mophius
- Crafty Captain
- Posts: 1486
- Joined: Thu Jan 05, 2017 7:04 am
Re: Decals
Ah, I got it now. Different shades of hull plates is what i was after. Thanks Hossfly
There is no dark side of the moon really, matter of fact its all dark.
- mophius
- Crafty Captain
- Posts: 1486
- Joined: Thu Jan 05, 2017 7:04 am
Re: Decals
Has anyone used these for 1/2500 scale
Description says they can be used for sacred scale but a bit of googling found that they are 1/3788 scale for gaming models.
I wonder if I can get them and resize them.
Description says they can be used for sacred scale but a bit of googling found that they are 1/3788 scale for gaming models.
I wonder if I can get them and resize them.
There is no dark side of the moon really, matter of fact its all dark.
- Hossfly72
- Charismatic Commander
- Posts: 498
- Joined: Sat Nov 09, 2013 8:15 pm
- Location: Lower Alabama
Re: Decals
Don't bother resizing and printing unless you just want to experiment or you're looking for a certain name and registry that isn't available.
Try ordering a custom set. Here's one place I've ordered decals from..
https://www.federationmodels.com
Try ordering a custom set. Here's one place I've ordered decals from..
https://www.federationmodels.com
i don't know. I'm making it up as I go.
- mophius
- Crafty Captain
- Posts: 1486
- Joined: Thu Jan 05, 2017 7:04 am
Re: Decals
I have ordered a set from there before and the service is great.Hossfly72 wrote:Don't bother resizing and printing unless you just want to experiment or you're looking for a certain name and registry that isn't available.
Try ordering a custom set. Here's one place I've ordered decals from..
https://www.federationmodels.com
They just don't have Oberth decals in 1/2500. I am also going to look at making my own ones for a kitbash Oberth variant I have my eye on but Ineed the basic ones first to see exactly how I want to change them.
I could just draw up my own set as trial and error but didn't want to waste paper.
I just had the idea to print them off in black ink on normal paper as I was typing the above, even if I was to do several sizes on one sheet to see which was best. This will require the use of my vernier from work to measure the model exactly.
Thanks for the inspiration.
There is no dark side of the moon really, matter of fact its all dark.
- MEATLOAFr
- Velutinous Vice Admiral
- Posts: 2624
- Joined: Fri Sep 28, 2012 12:46 pm
- Location: Omaha, NE
Re: Decals
I have them done up in 1/2500mophius wrote: They just don't have Oberth decals in 1/2500. I am also going to look at making my own ones for a kitbash Oberth variant I have my eye on but Ineed the basic ones first to see exactly how I want to change them.
If the world ends tomorrow, it's ALL YOUR FAULT!!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
- mophius
- Crafty Captain
- Posts: 1486
- Joined: Thu Jan 05, 2017 7:04 am
Re: Decals
Awesome
do you want a PM?MEATLOAFr wrote:I have them done up in 1/2500mophius wrote: They just don't have Oberth decals in 1/2500. I am also going to look at making my own ones for a kitbash Oberth variant I have my eye on but Ineed the basic ones first to see exactly how I want to change them.
There is no dark side of the moon really, matter of fact its all dark.
- Hossfly72
- Charismatic Commander
- Posts: 498
- Joined: Sat Nov 09, 2013 8:15 pm
- Location: Lower Alabama
Re: Decals
I didn't know if Meatloaf wanted me to advertise for him, but since he mentioned it, I'll let you knw that he printed a set for me and they are BEAUTIFUL! Better looking than many "professional" decals I've bought.
i don't know. I'm making it up as I go.