2500 Ent-D

The place for all things related to the "sacred scale".
marcnoonan
Charismatic Commander
Charismatic Commander
Posts: 303
Joined: Sun Nov 04, 2012 11:14 pm
Location: Guisborough, England
Contact:

Re: 2500 Ent-D

Postby marcnoonan » Mon Nov 13, 2017 7:26 pm

Sure.

Fortunately I have a couple of Ent D's sat around and the width is spot on so should just slot in. I've made the depth 1.5mm so it'll be strong enough but when you order it you will need to tick the "Print It Anyway" box otherwise the print will get rejected. The bottom edge is very thin and I've made it available for WSF, WSFP and FUD, but I would recommend FUD.

It's available through my shop, just click on the link below in my signature

Cheers

Marc
My Shapeways Shop
http://www.shapeways.com/shops/1/2500%2 ... e-products

Gallery
http://www.shapeways.com/designer/marcnoonan
If there's any model of anything you want that's not available anywhere.....send me a PM.

User avatar
mophius
Can-Do Captain
Can-Do Captain
Posts: 636
Joined: Thu Jan 05, 2017 7:04 am

Re: 2500 Ent-D

Postby mophius » Mon Nov 13, 2017 7:36 pm

I still have to cut the neck off the underside of the saucer from the 3 ship kit don't I?
lol, I don't have one of these at home yet so am unfamiliar with it.
There is no dark side of the moon really, matter of fact its all dark.

Imgur

User avatar
mophius
Can-Do Captain
Can-Do Captain
Posts: 636
Joined: Thu Jan 05, 2017 7:04 am

Re: 2500 Ent-D

Postby mophius » Mon Nov 13, 2017 8:03 pm

Ordered, there wasn't a print it anyway button.
FUD was the only option really. I won't see it until the end of the month.
There is no dark side of the moon really, matter of fact its all dark.

Imgur

marcnoonan
Charismatic Commander
Charismatic Commander
Posts: 303
Joined: Sun Nov 04, 2012 11:14 pm
Location: Guisborough, England
Contact:

Re: 2500 Ent-D

Postby marcnoonan » Mon Nov 13, 2017 8:36 pm

Sweet,

You're right, I logged out of Shapeways and ordered it as a customer and there's no PIA option, bummer. If the print gets rejected I can email you the file so you can upload it yourself and then the PIA option will appear in the Cart under the model quantity.

Yes, you'll need to cut away the neck section but there is a recess to mark out the join so it should be relatively easy with the perfect cutting guide.

Cheers

Marc
My Shapeways Shop
http://www.shapeways.com/shops/1/2500%2 ... e-products

Gallery
http://www.shapeways.com/designer/marcnoonan
If there's any model of anything you want that's not available anywhere.....send me a PM.

marcnoonan
Charismatic Commander
Charismatic Commander
Posts: 303
Joined: Sun Nov 04, 2012 11:14 pm
Location: Guisborough, England
Contact:

Re: 2500 Ent-D

Postby marcnoonan » Mon Nov 13, 2017 8:37 pm

Sweet,

You're right, I logged out of Shapeways and ordered it as a customer and there's no PIA option, bummer. If the print gets rejected I can email you the file so you can upload it yourself and then the PIA option will appear in the Cart under the model quantity.

Yes, you'll need to cut away the neck section but there is a recess to mark out the join so it should be relatively easy with the perfect cutting guide.

Cheers

Marc
My Shapeways Shop
http://www.shapeways.com/shops/1/2500%2 ... e-products

Gallery
http://www.shapeways.com/designer/marcnoonan
If there's any model of anything you want that's not available anywhere.....send me a PM.

User avatar
mophius
Can-Do Captain
Can-Do Captain
Posts: 636
Joined: Thu Jan 05, 2017 7:04 am

Re: 2500 Ent-D

Postby mophius » Mon Nov 13, 2017 9:07 pm

Thank you Marc for taking the time for this part.
There is no dark side of the moon really, matter of fact its all dark.

Imgur

User avatar
Tesral
Velutinous Vice Admiral
Velutinous Vice Admiral
Posts: 2757
Joined: Tue Dec 18, 2012 12:58 pm
Location: Dearborn, Mi -- at my desk.
Contact:

Re: 2500 Ent-D

Postby Tesral » Mon Nov 13, 2017 11:28 pm

marcnoonan wrote:Wanna play guinea pig? It's about $15 to print in FUD.

Marc


Tee-hee. I even have one cut apart.
Garry AKA --Phoenix-- Rising above the Flames.
"I saw it done on Voyager" is no excuse for anything, even breathing.

User avatar
mophius
Can-Do Captain
Can-Do Captain
Posts: 636
Joined: Thu Jan 05, 2017 7:04 am

Re: 2500 Ent-D

Postby mophius » Wed Nov 15, 2017 6:40 pm

Its now printed and shipped today so may see it early next week
There is no dark side of the moon really, matter of fact its all dark.

Imgur

User avatar
mophius
Can-Do Captain
Can-Do Captain
Posts: 636
Joined: Thu Jan 05, 2017 7:04 am

Re: 2500 Ent-D

Postby mophius » Fri Nov 17, 2017 2:35 pm

Took delivery of the part today.
Oh Marc, oh Marc. Where did we go wrong with you.
The part is great and the detail is exquisite. Only problem is that it is the part is what would go on the battlehead. What I would like is the mating part that would go inside the saucer.

It is a great part and I like it alot.
There is no dark side of the moon really, matter of fact its all dark.

Imgur

User avatar
el gato
Fatidical Fleet Admiral
Fatidical Fleet Admiral
Posts: 5298
Joined: Thu Apr 04, 2013 8:41 pm
Location: In a land whose boundaries are that of imagination

Re: 2500 Ent-D

Postby el gato » Fri Nov 17, 2017 5:47 pm

Dang, so close. I thought it was for both the battlehead and the undersaucer mating part
RogueWolf wrote:I've sacrificed many dozens (maybe even hundreds) of gummy bears to the dark modeling gods to grant me my wish... but I fear my offerings only amuse them, not appease them.


Return to “1/2500”

Who is online

Users browsing this forum: marcnoonan, MEATLOAFr, NoKhando, RogueWolf, trek3159 and 22 guests