Been working on this kit on-and-off for a few months now, and since I'm part way through the build phase I thought I'd share what's going on thus far. Here's what comes in the kit -------
The first page of the instruction sheet is finished.
RogueWolf envisioned the kit being painted with darker colors, so I ended up with this as a base color. Don't ask me what colors I used, because it was a hodge-podge layering of different colors until I found what looked right to the eye. Still need to do detail painting, so a lot more work to go before decals. And since decal design work is almost finished, this build will be as fast as the paint job takes until I'm satisfied that it looks right.
Romulan Vengeance from NorthTrek Creations
- Del
- Starship Engineer
- Posts: 2308
- Joined: Mon Oct 08, 2012 7:37 pm
- Location: Lawton, Oklahoma
- Contact:
Romulan Vengeance from NorthTrek Creations
Multi-Verse Models - http://www.mvmodels.biz or find me on Facebook
Retail sales of kits from Design Anomaly, Kessel Run Kits, NorthTrek Creations, Alternate Paradigms, and more!
Retail sales of kits from Design Anomaly, Kessel Run Kits, NorthTrek Creations, Alternate Paradigms, and more!
- MEATLOAFr
- Velutinous Vice Admiral
- Posts: 2624
- Joined: Fri Sep 28, 2012 12:46 pm
- Location: Omaha, NE
Re: Romulan Vengeance from NorthTrek Creations
I like it
If the world ends tomorrow, it's ALL YOUR FAULT!!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
- Griffworks
- Can-Do Captain
- Posts: 959
- Joined: Fri Jun 07, 2013 12:57 am
- Location: Boundaries of Imagination
Re: Romulan Vengeance from NorthTrek Creations
Oh, neat! What are the dimensions? Looks like maybe 8” / 20cm to 9” / 23cm? Wondering if it might make for a small 1k Romulan cruiser, maybe set in The Lost Era?
“And I looked, and behold a pale horse; and his name that sat on him was Death, and Hell followed with him.“
My Flickr Albums
My Flickr Albums
- Del
- Starship Engineer
- Posts: 2308
- Joined: Mon Oct 08, 2012 7:37 pm
- Location: Lawton, Oklahoma
- Contact:
Re: Romulan Vengeance from NorthTrek Creations
Already discussed that with RogueWolf, so I'll be making 2 sets of window decals for the kit. The set with larger diameter portholes could be used for either 1/1000 or 1/1400 as far as I'm concerned, so the kit will be listed as "Multi-Scale". This build will be using the 1/2500 scale windows though. When assembled, the kit is 8.5"/21.5cm long, and 7.5"/19cm wide.Griffworks wrote:Oh, neat! What are the dimensions? Looks like maybe 8” / 20cm to 9” / 23cm? Wondering if it might make for a small 1k Romulan cruiser, maybe set in The Lost Era?
Multi-Verse Models - http://www.mvmodels.biz or find me on Facebook
Retail sales of kits from Design Anomaly, Kessel Run Kits, NorthTrek Creations, Alternate Paradigms, and more!
Retail sales of kits from Design Anomaly, Kessel Run Kits, NorthTrek Creations, Alternate Paradigms, and more!
- mophius
- Crafty Captain
- Posts: 1485
- Joined: Thu Jan 05, 2017 7:04 am
Re: Romulan Vengeance from NorthTrek Creations
Looks like the top half of a D'deridex.
Also looks great, love the deep colours you used.
Also looks great, love the deep colours you used.
There is no dark side of the moon really, matter of fact its all dark.
- Griffworks
- Can-Do Captain
- Posts: 959
- Joined: Fri Jun 07, 2013 12:57 am
- Location: Boundaries of Imagination
Re: Romulan Vengeance from NorthTrek Creations
Sweet size at 8.5” / 21.5 for 1/1000. Looking forward to adding it to my Romulan Fleet!
“And I looked, and behold a pale horse; and his name that sat on him was Death, and Hell followed with him.“
My Flickr Albums
My Flickr Albums
- RogueWolf
- Velutinous Vice Admiral
- Posts: 2872
- Joined: Sun Sep 30, 2012 3:49 pm
- Location: NL, Canada
Re: Romulan Vengeance from NorthTrek Creations
Griffworks wrote:Sweet size at 8.5” / 21.5 for 1/1000. Looking forward to adding it to my Romulan Fleet!
Glad you like her Griff! She'll look good in any scale fleet!
- Griffworks
- Can-Do Captain
- Posts: 959
- Joined: Fri Jun 07, 2013 12:57 am
- Location: Boundaries of Imagination
Re: Romulan Vengeance from NorthTrek Creations
I look forward to eventually getting it!
“And I looked, and behold a pale horse; and his name that sat on him was Death, and Hell followed with him.“
My Flickr Albums
My Flickr Albums
-
- Can-Do Captain
- Posts: 633
- Joined: Fri Oct 19, 2012 8:53 am
Re: Romulan Vengeance from NorthTrek Creations
That's awesome- but if the decals are opaque white with clear background (ALPS or silkscreen) I'd buy the decals in bulk!
- Del
- Starship Engineer
- Posts: 2308
- Joined: Mon Oct 08, 2012 7:37 pm
- Location: Lawton, Oklahoma
- Contact:
Re: Romulan Vengeance from NorthTrek Creations
Nope. I've had an ALPS MD-5000 new out of the box with plenty of cartridges for 4 years, standard print test proves it works with my XP system, but I can't get any assistance on how to use it with spot printing. Decals will be have to be black.Jason Abbadon wrote:That's awesome- but if the decals are opaque white with clear background (ALPS or silkscreen) I'd buy the decals in bulk!
Multi-Verse Models - http://www.mvmodels.biz or find me on Facebook
Retail sales of kits from Design Anomaly, Kessel Run Kits, NorthTrek Creations, Alternate Paradigms, and more!
Retail sales of kits from Design Anomaly, Kessel Run Kits, NorthTrek Creations, Alternate Paradigms, and more!