This is the SciFi Skunkworks 1/2500 resin kit. Sadly, it's long Out of Production. It's one of my favorite Klingon designs from the old FASA Star Trek Starship Combat Simulator.
The model is cast in white resin and one piece. It's roughly 5" / 12.5 long and 3.5" / 9cm wide. This is another that I'd love to see in 1/1000 scale. Maybe one day....
I've contacted someone about the possibility of a 3D model being built for the sake of printing. I'd love to get one built for my collection.
Still lots of work to do on this one, obviously.
L-24 Ever-Victorious Battleship
-
Griffworks
- Can-Do Captain
- Posts: 959
- Joined: Fri Jun 07, 2013 12:57 am
- Location: Boundaries of Imagination
L-24 Ever-Victorious Battleship
“And I looked, and behold a pale horse; and his name that sat on him was Death, and Hell followed with him.“
My Flickr Albums
My Flickr Albums
-
NoKhando
- Lemme At Em Lieutenant
- Posts: 93
- Joined: Wed May 11, 2016 1:34 pm
- Location: In the land of the Bombley Boo
Re: L-24 Ever-Victorious Battleship
Wow ! 
That is an astonishing level of detail . I'd happily just leave that in its primer coat just to gaze in wonder upon it .
That is an astonishing level of detail . I'd happily just leave that in its primer coat just to gaze in wonder upon it .
-
Tesral
- Administrator
- Posts: 4941
- Joined: Tue Dec 18, 2012 12:58 pm
- Location: Dearborn, Mi -- at my desk.
- Contact:
Re: L-24 Ever-Victorious Battleship
That the modeler got that much detail off a FASA drawing is amazing. Wonderful job.
Garry AKA --Phoenix-- Rising above the Flames.
"I saw it done on Voyager" is no excuse for anything, even breathing.
"I saw it done on Voyager" is no excuse for anything, even breathing.
-
MSgtUSAFRet
- Can-Do Captain
- Posts: 531
- Joined: Wed Jun 15, 2016 5:49 pm
- Location: Houston, TX
Re: L-24 Ever-Victorious Battleship
Griffworks,
I like the look of the design, too! It looks like the D7's bigger, meaner brother; almost the Empire's Dreadnaught! This would be cool to see in a larger size!
Are you gonna paint it or just gaze on it like NoKhando?!
Steve
BTW, I found you on Imgur! You should post there, too!
I like the look of the design, too! It looks like the D7's bigger, meaner brother; almost the Empire's Dreadnaught! This would be cool to see in a larger size!
Are you gonna paint it or just gaze on it like NoKhando?!
Steve
BTW, I found you on Imgur! You should post there, too!
-
trekriffic
- Admiral of the Fleet
- Posts: 2749
- Joined: Mon Oct 01, 2012 4:16 pm
Re: L-24 Ever-Victorious Battleship
I concur with the Master Sergeant's comments. The D-7's big, badass brother.
Three photorp tubes on the bow and I see three rings aft which I suppose could be photorp tubes, they just need to be drilled out a bit deeper.
The angular structure on the rear is close to that seen on the Vor'Cha so, to my mind anyway, she falls somewhere between TOS and STTNG in the timeline.
Definitely looks formidable.
Add a third nacelle and you've got a dreadnought.
Three photorp tubes on the bow and I see three rings aft which I suppose could be photorp tubes, they just need to be drilled out a bit deeper.
The angular structure on the rear is close to that seen on the Vor'Cha so, to my mind anyway, she falls somewhere between TOS and STTNG in the timeline.
Definitely looks formidable.
Add a third nacelle and you've got a dreadnought.
"You broke your little ships."
My albums on flickr: https://www.flickr.com/photos/29607470@N08/sets/
My albums on flickr: https://www.flickr.com/photos/29607470@N08/sets/
-
MEATLOAFr
- Velutinous Vice Admiral
- Posts: 2624
- Joined: Fri Sep 28, 2012 12:46 pm
- Location: Omaha, NE
Re: L-24 Ever-Victorious Battleship
May the EMPIRE grow stronger with this ship added to the fleet
If the world ends tomorrow, it's ALL YOUR FAULT!!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
Custom Decals, and Vinyl Cutting services available
ABLE TO PRINT DECALS IN WHITE
NOW ABLE TO 3D PRINT SMALL SCALE MODELS (ANYCUBIC PHOTON & MONO X) have STL, will print!!
-
TrekMD
- Head of Starfleet Medical
- Posts: 1750
- Joined: Mon Nov 19, 2012 9:57 pm
- Location: Coral Gables, FL
- Contact:
Re: L-24 Ever-Victorious Battleship
I would not want to !!!!!!!! off the captain of this ship!
Medicus ad astra, non laedant...
-
el gato
- Fatidical Fleet Admiral
- Posts: 6050
- Joined: Thu Apr 04, 2013 8:41 pm
- Location: In a land whose boundaries are that of imagination
Re: L-24 Ever-Victorious Battleship
Yeah this is a beauty of a ship, both in design and execution
RogueWolf wrote:I've sacrificed many dozens (maybe even hundreds) of gummy bears to the dark modeling gods to grant me my wish... but I fear my offerings only amuse them, not appease them.
-
trekriffic
- Admiral of the Fleet
- Posts: 2749
- Joined: Mon Oct 01, 2012 4:16 pm
Re: L-24 Ever-Victorious Battleship
You know, when I came up with the backstory for my USS Abaddon dreadnought I envisioned it taking on multiple Klingon battleships in combat. In my imagination I conjured up some ideas of what such battleships might look like and, guess what, they looked a lot like the Ever-Victorious!
"You broke your little ships."
My albums on flickr: https://www.flickr.com/photos/29607470@N08/sets/
My albums on flickr: https://www.flickr.com/photos/29607470@N08/sets/
-
ian
- Legendary LT Commander
- Posts: 198
- Joined: Fri Nov 16, 2012 4:47 am
Re: L-24 Ever-Victorious Battleship
https://www.shapeways.com/product/F2M2273NA/klingon-b11I've contacted someone about the possibility of a 3D model being built for the sake of printing. I'd love to get one built for my collection.
I have tried to get this guy to make it available to the public but without success. I think that this guy is either justicar or slawton but I am not sure. I have inquired with slawton about releasing his stuff as well but he said that he was currently busy with other projects.
