1/1400 AMT Enterprise-C (So it begins)

WiP, finished models and general 1/1400 chit chat.
User avatar
mophius
Can-Do Captain
Can-Do Captain
Posts: 723
Joined: Thu Jan 05, 2017 7:04 am

Re: 1/1400 AMT Enterprise-C (So it begins)

Postby mophius » Mon Jan 08, 2018 6:44 pm

Yes I have one on my imitation dremel which is handy for tight areas.
There is no dark side of the moon really, matter of fact its all dark.

Imgur
Shapeways Shop

User avatar
MSgtUSAFRet
Charismatic Commander
Charismatic Commander
Posts: 405
Joined: Wed Jun 15, 2016 5:49 pm
Location: Houston, TX

Re: 1/1400 AMT Enterprise-C (So it begins)

Postby MSgtUSAFRet » Wed Jan 10, 2018 2:13 pm

trekriffic wrote:
MSgtUSAFRet wrote:I only got one section done before my hand gave out from holding the Dremel. (If any one knows of a smaller handpiece, lemme know as I could certainly use it instead of that five pound Dremel!)


Get yourself a flex shaft attachment like the one in this video:

https://www.youtube.com/watch?v=o6ByDVSOTPc

I've used one for years with my Dremel and it's one of the best investments I've ever made.



OOOOOOooooooo! I will have to pop round and get one of these!

Thanks, trekriffic!

Dingbat
Erratic Ensign
Erratic Ensign
Posts: 5
Joined: Fri Sep 11, 2015 5:10 am

Re: 1/1400 AMT Enterprise-C (So it begins)

Postby Dingbat » Fri Jan 12, 2018 2:50 pm

Hey MSgt
Im working on this model myself (along with several others) and this is what I did. Treat yourself with a Tamiya hobby drill:

https://www.amazon.com/gp/aw/d/B000J46W ... ref=plSrch

It has a slower RPM than a dremmel which will give you more control. I tried a dremel with the flex shaft (awsome tool buy the way!) but found it's higher RPM caused the 1/32" bit to wobble causing control issues. Also, if you dont have them already, get the dremel collets #4485 they look diffrent than the two that come with the drill, but center up nice and turn the bits true.

I first used a sewing machine needle in a pin vise to "center punch" a divit in the top of the window. Drill it out and use another 1/32" bit in a pin vice as a saw to trim out the rest. You do have to be very gentle as you saw: drill bits arnt ment to have side pressure and will snap if you get too crazy! I did 12 at a time this way to break up the monotony and it wasnt too bad.

Hope Im not too late and that this helps some.

User avatar
trekriffic
Can-Do Captain (CW)
Can-Do Captain (CW)
Posts: 1548
Joined: Mon Oct 01, 2012 4:16 pm

Re: 1/1400 AMT Enterprise-C (So it begins)

Postby trekriffic » Fri Jan 12, 2018 10:16 pm

Dingbat wrote:Hey MSgt
Im working on this model myself (along with several others) and this is what I did. Treat yourself with a Tamiya hobby drill:

https://www.amazon.com/gp/aw/d/B000J46W ... ref=plSrch


Seconded. I have one of these Tamiya drills too. You definitely have better control at the slower speed of the Tamiya drill.
"You broke your little ships."

My albums on flickr: https://www.flickr.com/photos/29607470@N08/sets/

Dingbat
Erratic Ensign
Erratic Ensign
Posts: 5
Joined: Fri Sep 11, 2015 5:10 am

Re: 1/1400 AMT Enterprise-C (So it begins)

Postby Dingbat » Mon Jan 15, 2018 1:46 am

Whats your plan on lighting this baby? Are you going basic led circuits or Adriano controller? Im using a 12v 1A wall wart as a power supply on my build to light several pieces of led strips. Adrinos are waayyyyy to advanced for me. Im always interested on how others do their electronics since I seem to strugle with it. Are you planing on leds or fiber optic strands for the nav lights?

User avatar
MSgtUSAFRet
Charismatic Commander
Charismatic Commander
Posts: 405
Joined: Wed Jun 15, 2016 5:49 pm
Location: Houston, TX

Re: 1/1400 AMT Enterprise-C (So it begins)

Postby MSgtUSAFRet » Mon Jan 15, 2018 11:49 pm

Hey Everybody!

trekriffic wrote:
Dingbat wrote:Hey MSgt
Im working on this model myself (along with several others) and this is what I did. Treat yourself with a Tamiya hobby drill:

https://www.amazon.com/gp/aw/d/B000J46W ... ref=plSrch


Seconded. I have one of these Tamiya drills too. You definitely have better control at the slower speed of the Tamiya drill.


Dingbat and trekriffic, I will seriously consider it. Seeing as I have have already spent above my allotted budget for this month, I will probably have to wait a bit.

@Dingbat - as for lighting this for the main areas, I will be using 5mm bulbs in the secondary hull and and saucer, but the engines I'll use 3mm LEDs for the engine lights and 3mm colored lights for the running and formation lights.

Now that I am thinking of it. I could use a single white LED and color the ends of the fibers with the appropriate colors and maximize the limited space. I am still working it all out. Kinda focused on the windows.

I was able to get most of the dorsal saucer windows drilled out. Except for the B/C deck, those are a different size!

ImageFinished drilling ventral saucer.

Thanks for asking! It gets me thinking again! And thanks for all the recommendations! Keep em coming!

Steve

BTW @ Dingbat - are you showing your build here? It would be great to see someone else's take on the ship!

Dingbat
Erratic Ensign
Erratic Ensign
Posts: 5
Joined: Fri Sep 11, 2015 5:10 am

Re: 1/1400 AMT Enterprise-C (So it begins)

Postby Dingbat » Tue Jan 16, 2018 1:00 pm

That sauser looks great MSgt! Thats alot of windows to power through.
I havent uploaded any pic of my build yet. My hobby time is pretty limited (two kids and a third on the way + job = not much time) and I confess I threw the brakes on when the Zevezda 1/2700 star destroyer came out. Ill snap some pics and get a thread going though.


Return to “1/1400”

Who is online

Users browsing this forum: No registered users and 36 guests