Getting started

If you just want to chat with other newbies or basic skill level modelers about the hobby.
User avatar
mophius
Can-Do Captain
Can-Do Captain
Posts: 642
Joined: Thu Jan 05, 2017 7:04 am

Re: Getting started

Postby mophius » Tue Jan 10, 2017 8:09 pm

I was too scared to take the kit home today. Maybe tomorrow when I have more courage and a better excuse.
Only problem with that is tomorrow I am expecting two more sets and another on Thursday.
There is no dark side of the moon really, matter of fact its all dark.

Imgur

User avatar
Hossfly72
Charismatic Commander
Charismatic Commander
Posts: 471
Joined: Sat Nov 09, 2013 8:15 pm
Location: Lower Alabama

Re: Getting started

Postby Hossfly72 » Tue Jan 10, 2017 8:18 pm

An idea... take each model home on a Friday.. not each pack of models, but each model..
this week, the little Enterprise.. next week, the Klingon.. then the Romulan..
If she asks, you bought each one for five bucks, spent a week building each one, didn't go find drugs or hookers or chase loose women... so five bucks a week brings several hours of pleasure and stress relief and most importantly you don't have 12 different builds going at the same time and can concentrate on each one to give it your whole attention.
i don't know. I'm making it up as I go.

User avatar
Tesral
Velutinous Vice Admiral
Velutinous Vice Admiral
Posts: 2769
Joined: Tue Dec 18, 2012 12:58 pm
Location: Dearborn, Mi -- at my desk.
Contact:

Re: Getting started

Postby Tesral » Tue Jan 10, 2017 8:21 pm

One does not need Exact 0 either. The best for my money are the pro-edge knives and blades. I think their #11 is a tad larger than Exacto. A tad sharper too.

Multiple handles a must. I have the usual #11, a medical chisel and the tip deliberate snapped off blade. as constant use. I have the things squirreled around the house too. An Exacto handle in my computer bag. The cap from a Bic pen fits neatly over the blade. I have one among the pens in my office.

The #6 handles are idea for various saws.

A personal note. DO NOT work with dull knives. I am a slow learner. I have had two trips to the Emergency Room over that error. Dull knives require more force and are more likely to slip.
Last edited by Tesral on Wed Jan 11, 2017 5:49 am, edited 1 time in total.
Garry AKA --Phoenix-- Rising above the Flames.
"I saw it done on Voyager" is no excuse for anything, even breathing.

User avatar
mophius
Can-Do Captain
Can-Do Captain
Posts: 642
Joined: Thu Jan 05, 2017 7:04 am

Re: Getting started

Postby mophius » Tue Jan 10, 2017 8:40 pm

I was thinking of getting this:
https://www.machinemart.co.uk/p/52-piece-knife-set/

looks like a comprehensive kit and relatively cheap too.
Handy that the shop is next to my work too
There is no dark side of the moon really, matter of fact its all dark.

Imgur

User avatar
trekriffic
Can-Do Captain (CW)
Can-Do Captain (CW)
Posts: 1514
Joined: Mon Oct 01, 2012 4:16 pm

Re: Getting started

Postby trekriffic » Tue Jan 10, 2017 10:11 pm

mophius wrote:I was thinking of getting this:
https://www.machinemart.co.uk/p/52-piece-knife-set/

looks like a comprehensive kit and relatively cheap too.
Handy that the shop is next to my work too


Oooh! That set looks dandy. :thumbsup:

You might find these threads helpful too as regards tools and modeling resources:

viewtopic.php?f=62&t=3359

viewtopic.php?f=62&t=3357
"You broke your little ships."

My albums on flickr: https://www.flickr.com/photos/29607470@N08/sets/

User avatar
Tesral
Velutinous Vice Admiral
Velutinous Vice Admiral
Posts: 2769
Joined: Tue Dec 18, 2012 12:58 pm
Location: Dearborn, Mi -- at my desk.
Contact:

Re: Getting started

Postby Tesral » Tue Jan 10, 2017 11:14 pm

I am Garry S. And I am a tool addict.

toolbox.JPG


Yes, that is my MODELING tool box. I have a couple for big tools downstairs.
Garry AKA --Phoenix-- Rising above the Flames.
"I saw it done on Voyager" is no excuse for anything, even breathing.

User avatar
Hossfly72
Charismatic Commander
Charismatic Commander
Posts: 471
Joined: Sat Nov 09, 2013 8:15 pm
Location: Lower Alabama

Re: Getting started

Postby Hossfly72 » Wed Jan 11, 2017 12:43 am

Holy mackerel!
i don't know. I'm making it up as I go.

User avatar
MEATLOAFr
Rampaging Rear Admiral (LH)
Rampaging Rear Admiral (LH)
Posts: 1767
Joined: Fri Sep 28, 2012 12:46 pm
Location: Lincoln, Nebraska

Re: Getting started

Postby MEATLOAFr » Wed Jan 11, 2017 12:58 am

Tesral wrote:A personal note. DO NOT work with dull knives. I am a slow learner. I have had two trips to the Emergency Room over that error. Dull knives require more force and are more likely to slip.


I can't agree more...

I have done that too, have seen the tendon & knuckle on the index finger of my left hand... was cool to see my finger bend from the inside

It did not hurt or bleed until doctor used anesthetic "for pain" to stitch it up - what a way to spend valentines day night
If the world ends tomorrow, it's ALL YOUR FAULT!!!

User avatar
mophius
Can-Do Captain
Can-Do Captain
Posts: 642
Joined: Thu Jan 05, 2017 7:04 am

Re: Getting started

Postby mophius » Wed Jan 11, 2017 11:11 am

Delivery number two just came in. Still waiting on the TOS kit that should have been first
Attachments
IMG_20170111_110551739.jpg
There is no dark side of the moon really, matter of fact its all dark.

Imgur

User avatar
mophius
Can-Do Captain
Can-Do Captain
Posts: 642
Joined: Thu Jan 05, 2017 7:04 am

Re: Getting started

Postby mophius » Wed Jan 11, 2017 12:56 pm

There it is, now I can get started.

Well, after I tell the wife.
Attachments
IMG_20170111_123150966.jpg
There is no dark side of the moon really, matter of fact its all dark.

Imgur


Return to “Newbie Modeler Hangout”

Who is online

Users browsing this forum: No registered users and 4 guests